Aluminum coil packaging should be selected according to the specifications and size of the product packaging box and packaging method, for box packaging, the product can not be squeezed or moved after the box. The packing cases can be made of wood, multilayer board, fiberboard, and metal. The packing cases should be clean and tidy, with enough strength to ensure no deformation or damage in the process of storage and transportation. The nails in the wooden packing box should be arranged in step, and the nail tips should not be exposed. They should be turned upside down to avoid hurting the aluminum foil by the nail caps and nail tips during storage and transportation. The height of the bottom bracket should meet the requirements of forklift transportation. After the aluminum coil product is inspected and stamped, a layer of strong neutral or weak acid material should be wrapped around the outside, and the joint should be sealed with adhesive tape or label. Soft pad on end pad. To protect the end face of the aluminium coil. Add desiccant, cover plastic bag, plug the tube core beyond the aluminum coil at both ends of plastic bag, seal it with appropriate plastic plug and put it into packing box. After the products are packed, cover them with a layer of moisture-proof paper or plastic sheet, and put them on the packing list before sealing the products with steel tape. The steel tape should be tied firmly.
Conventional packaging of aluminum coil: for the thickness of more than 0.05mm and the hard state of aluminum coil, generally can use the well frame packaging, the packaging should meet the requirements of storage and transportation. The height of the lower side of the wood should meet the requirements of the work of the car. The upper side of the wood should be made into an arc shape corresponding to the radial direction of the roll. The upper and lower sides of the wood should be fixed with a screw, and the length of the screw should be lower than the arc surface of the upper side of the wood to avoid puncture the aluminum coil. The products shall be inspected and stamped. First of all, the aluminum foil roll should be wrapped with a strong layer of neutral or weak acid material (generally high release), and put on the packing list, lap joints with adhesive tape. Soft pad on end pad. To protect the end face of the aluminum box roll. Secondly, add desiccant, wrap the whole material with the whole plastic cloth, lap the outer plastic cloth mouth down and adhesive tape, the plastic cloth at both ends of the excess plug tube core. Finally, wrap the whole aluminum coil and seal the two ends with rainproof cardboard of the same size along the circumferential direction respectively, and the joint between the end face and circumferential and all gaps are glued with adhesive tape. Place the wrapped aluminum foil coil on the well frame and fix it with steel belt along the circumferential direction. The steel belt should be tied firmly. On the end face of the wrapped aluminum foil roll, each stick a container plate. In addition to the bearing capacity and packaging cost of boxes and zigzagging frames, we should also consider the mode of transportation and the transportation and handling capacity of users. Usually, the packaging weight of each aluminum coil in our company is 2.6 tons.
Aluminum coil export packaging: aluminum coil is a large export products, export packaging is usually adopted fumigating well frame, fixed with steel belt, aluminum coil external with double moisture-proof rain cloth, internal moisture-proof agent, adopt sealed packaging, suitable for sea transportation.
< Six advantages of color coated alum... Where is the difference between alu... >