The raw materials are pure aluminum or aluminum alloy cast-rolled aluminum coils and hot-rolled aluminum coils, which are rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill. Cut into aluminium strips of different widths.
Anyone who is familiar with this metal material knows that there are actually many uses of aluminum strips, such as aluminum-plastic composite pipes, cables, optical cables, transformers, heaters, shutters, etc. 1060 requires high corrosion resistance and formability, but does not require high strength. Chemical equipment is its typical use.
1100 aluminum strip is used for processing that requires good formability and high corrosion resistance, but does not require high-strength parts, such as chemical products, food industry equipment and storage containers, sheet metal processing,deep-drawn or spinning concave vessels, welded parts, heat exchangers, printing plates, nameplates, reflectors.
Aluminum strip is an aluminum deep-processed product formed by aluminum coil slitting. It is the most important raw material in industry. According to the different alloying elements it contains, the material is the same as aluminum plate, and it is also divided into eight series. However, the commonly used series are 1000, 3000, 5000 and 8000 series. According to the different annealing state, it is divided into full soft, semi hard and full hard. The most commonly used should belong to the full soft system, because this series is easier to stretch and bend.
The main processing equipment of aluminum strip is the slitting unit, which can be divided into the required length and width according to the needs. Of course, the equipment for slitting processing is general, and it can also process copper coils. The processed products are called copper strips. The international raw materials for electronic products are no longer purely dependent on copper tape. Since the electrical conductivity of aluminum is only lower than that of copper, it is becoming an international trend to replace copper tape.
< The concept and use of aluminum pla... What are the classifications of pat... >