The packing case and packing method of aluminum rolls should be selected according to the specifications and dimensions of the products. For carton packing, the products should not be squeezed or moved after being put into the box. The packing case can be made of wood, multilayer board, fiberboard, metal and other materials. The packing case should be clean and tidy, with sufficient strength to ensure no deformation or damage during storage and transportation. The NAILS IN THE WOODEN PACKING box SHOULD be ARRANGED in STEP, the nail tips should not be exposed, and should be inverted to avoid the nail caps and nail tips pricking aluminum foil in the process of storage and transportation, and the height of the bottom bracket should meet the requirements of forklift transportation. After THE aluminum coil is inspected and stamped, the outside should be wrapped with a layer of strong neutral or weak acid material, and the joint should be sealed with tape or label. Soft liner on the end pad. To protect the end face of the aluminum coil. Add desiccant, cover with a plastic bag, plug the end of the plastic bag beyond the aluminum coil into the tube core, seal with a plastic plug of appropriate size, and then put into the packing box. After packing the products, cover them with a layer of moisture-proof paper or plastic sheet, and put them in the packing list before sealing the products with steel tape. The steel tape should be firmly bound.
Conventional PACKAGING of aluminum rolls: For the hard aluminum rolls with thickness over 0.05mm, the TIC-TAC-toe frame packaging can be generally adopted, and the packaging should meet the requirements of storage and transportation. The height of the lower wood should meet the requirements of the work of the car. The upper and lower wood is made of an arc shape corresponding to the radial direction of the roll. The upper and lower wood is fixed with a screw, and the screw length should be lower than the arc surface of the upper wood to avoid the injury of the aluminum roll. The product is qualified and stamped. First of all, the aluminum foil roll outside should be wrapped with a layer of strong neutral or weak acid material (generally used high release), and put the packing list, the joint with adhesive tape. Soft liner on the end pad. To protect the end face of the aluminum box roll. Secondly, add desiccant, wrap the whole plastic sheet with the whole material roll, lap the outer plastic sheet mouth down and sticky tape, the plastic sheet ends of the excess plug the tube core. Finally, the rain-proof cardboard with the same size was used to wrap the whole aluminum roll and seal the two end faces along the circumferential direction respectively, and the interface between the end face and the circumferential direction and all gaps were cemented with adhesive tape. Put the wrapped aluminum foil coil on the well frame and fix it with steel belt along the circumferential direction. The steel belt should be bound firmly. Stick a box card on each end face of the wrapped aluminum foil roll. In addition to the load-bearing and packing cost of the boxes and tic-tac-cross frames, the transportation mode and the transportation and handling capacity of the users should also be considered. Usually, the packing weight of each aluminum coil in our company is 2.6 tons.
Aluminum coil export packaging: Aluminum coil is a product with large export volume, the export packaging is usually adopted the fumigated well frame, the outside is fixed with steel belt, the outside of the aluminum coil is double-layer moisture-proof rain cloth, internal moisture-proof agent, sealing packaging, suitable for sea transportation.
< Advantages of color coated aluminum... What are the packaging specificatio... >